A look at the hardware connector
Hardware fittings are the most intuitive quality standards, good hardware to switch freely, no noise, surface plating without peeling. Some high-end furniture hardware is imported. Foreign language logos can be found on it. Because the arbitrarily removable combination is the biggest advantage of the panel furniture, the quality of the hardware connector is very important.
Metal parts require dexterity, smoothness, good surface plating treatment, no rust, burrs, etc., and the precision of the fittings is high. The plastic parts should be beautiful in appearance and colorful in color. The forceful parts in use should be strong and flexible, and should not be too thin. The open type connection requires flexible rotation, so that the furniture will be smooth and easy to use during opening and no friction.
Second look at the edge of the veneer
The quality of the edge seal greatly affects the quality of the furniture. The first is the pros and cons of the edge-sealing material, and secondly, whether the edge-sealing is uneven or tilted. Good edge seals should be tightly attached to the entire sheet.
Veneer material has a great influence on the furniture grade. To touch the surface paint film, the general high-end panel furniture is a solid wood veneer, the mid-range is a paper veneer, a molding and the surface of the plastic veneer is a lower price. Among them, the paper veneer has different grades due to different processing technologies.
Three to see the quality of the plate
Carefully check whether the coating on the edges and sides of the board is uniform, whether the adhesive is firm, whether the trim is smooth and smooth, and whether the side surface of the visible parts such as the side panel, door panel, drawer panel, etc., is sealed or not. The edges of the well-decorated plate can't touch the bond marks.
Assembling the assembly mainly depends on whether the drill hole is delicate and tidy, and whether the connecting piece is firm after being installed. After the plane is connected with the end face, there is no gap between the T-shaped joints, and there is no looseness by hand.
Four to see the size
The furniture market is currently dominated by sets of bedroom furniture and office furniture, as well as multifunctional video and electrical cabinets. The main dimensions of furniture have national standards.
For example, the depth of the wardrobe in the hanging wardrobe shall be 530 mm or more, the height of table furniture shall be 680 mm to 760 mm, and the clearance between bookcases shall be 230 mm to 310 mm.
Consumers need to understand these major dimensions most, because if the furniture is smaller than the specified size, it will bring inconvenience when used. If the depth of the closet space is too small, it will affect the hanging of clothes, causing the door not to close.